3DXTech CARBONX™ ABS+CF (750g)

filler

Size: 1.75mm
Color: Black
Price:
$58

Description

CarbonX™ CF-ABS is a high-performance carbon fiber reinforced ABS 3D printing filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.

 Water Soluble Support works great with CarbonX™ CF-ABS and allows you to print parts with complex geometries and then dissolve away the support in warm water. CarbonX™ CF grades are abrasive and will quickly wear out a brass nozzle.  We recommend our A2 Hardened Steel Nozzles

Recommended Print Conditions:

  • Extruder:  220-240°C.  CarbonX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  
  • Bed Temp:  100-110°C
  • Bed Prep:  3DXTech Kapton Tape, ABS/Acetone Slurry
  • Nozzle: We currently recommend minimum 0.4mm orifice. 
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
  • Support Material:  Recommend  water soluble support 
  • Drying Instructions:  Desiccant, Air Tight Bag, or Drying Equipment 

Payment & Security

American Express Apple Pay Diners Club Discover Elo Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed